Uninstalling Communication Engineering Tool For Spa-Zc 40X; Installing Connectivity Packages - ABB SPA-ZC 402 Installation And Commissioning Manual

1MRS755380
5.3.3.
5.4.
SPA/ Ethernet Adapter
SPA to IEC 61850 Gateway
Installation and Commissioning Manual

Uninstalling Communication Engineering Tool for SPA-ZC 40x

1. Open the Add or Remove Programs dialog by selecting Start > Settings >
Control Panel > Add or Remove Programs.
2. Select Communication Engineering Tool (CET) for SPA-ZC 40x and click
Remove.
Uninstall CET for SPA-ZC 40x in order to install a new version and to
update the software. Uninstallation does not remove the Microsoft
SQL Server and .NET Framework. Removing these programs can
affect the functionality of the other ABB applications.
Detailed instructions for upgrading the software are provided when the
upgrade is available.

Installing Connectivity Packages

1. Close all the open programs and insert the SPA-ZC 402 configuration CD to the
CD-ROM drive of your PC.
The Connectivity Packages can be downloaded on the ABB web site
http://www.abb.com/substationautomation.
Contact ABB to check the connectivity package's status for the
Intelligent Electronic Device (IED) in question.
2. Double-click the Connectivity Package installation program and select the
relevant IED (.msi) to start the installation.
Install the Connectivity Package after installing the Communication
Engineering Tool (CET) for SPA-ZC 40x, see Section 5.3.2. Installing
Communication Engineering Tool for SPA-ZC 40x. If this is not the
case, re-install the Connectivity Package after installing the CET for
SPA-ZC 40x.
3. The installation wizard extracts the installation files to your local computer.
SPA-ZC 402 SPA-ZC 402
23