Setup Relating To Interfaces With Peripheral Devices (Periph Menu) - Sony DVS-7250 User Manual

Setup Relating to Interfaces With
Peripheral Devices (PERIPH Menu)
Accessing the PERIPH menu
13-36
Chapter 13 Setup
To carry out setup operations relating to interfaces with peripheral devices,
access the PERIPH menu.
In the SETUP menu, select item 4 (PERIPH).
The PERIPH menu appears.
PORT
ASSIGN
F1 F2 F3
Function key indications in the PERIPH menu
Selecting the next menu
When you have displayed the PERIPH menu, access the next menu according
to the data item you wish to set.
The menus you can access from the PERIPH menu are listed in the following
table, together with their functions, and the function keys you need to press to
access them.
Menus accessed from the PERIPH menu
Menu Functions
PORT ASSIGN Selecting the type of device connected to
an RS-422A port of the switcher
AUX Making the following settings relating to
CONTROL auxiliary bus control from an RS-422A
port of the switcher.
• Setting the control function for bus
control from an RS-422A port
• Setting the function for recalling
auxiliary bus settings when executing a
key frame or snapshot
DME Making the following settings relating to
INTERFACE interface settings for a digital multi
effects
• Making the reentry cross-point button
setting
• Setting the on-air tally function
• Making the auxiliary bus setting for
output to DMEs
• Assigning DMEs for DME wipes
ROUTER Setting the correspondence between the
INTERFACE routing switcher output and the switcher
input
AUX GPI
DME ROUTER
CTRL INPUT
IF IF
F4 F5 F6 F7
GPI PANEL
OUTPUT PORT
F8 F9 F10
Function key See page
F3 (PORT 13-37
ASSIGN)
F4 (AUX 13-38
CTRL)
F5 (DME IF) 13-39
F6 (ROUTER 13-41
IF)
(Continued)