Interfacing With External Devices (Device Interface Menu); Making Control Panel Gpi Input Settings - Sony MVS-8000 User Manual

Interfacing With External Devices (Device
Interface Menu)
To carry out setup relating to connections with external devices, display the
Panel >Device Interface menu.
To display the Device Interface menu
In the Engineering Setup menu, select VF2 'Panel' and HF5 'Device
Interface.'
The following functions are available here.
• GPI Input: Set the GPI input ports and trigger type, and make the action
• GPI Output: Set the GPI output ports and trigger type, and make the action
• P-Bus Control: Set the control mode for P-Bus devices.
• DCU Serial Port Assign: Assign the devices (disk recorder/VTR/Extended
• Editor Port Assign: When the BZS-8050 license is valid, make settings for
• Aux Bus Override Mode: Set the operating mode when "Aux ? O'ride Src

Making Control Panel GPI Input Settings

1
2
1178

Interfacing With External Devices (Device Interface Menu)

settings.
settings.
VTR) connected to a DCU and accessible from the control panel to the
[DEV1] to [DEV12] buttons which become operative when you press the
[DEV] button on the device control block. For a disk recorder or Extended
VTR, you can also make settings relating to sharing of file lists. Further, you
can make settings for devices (disk recorder/VTR/Extended VTR) operable
from an editing keyboard.
the SCU editor panel port.
??" is selected as the GPI input action.
In the Panel >Device Interface menu, press [GPI Input].
The GPI Input menu appears.
Using any of the following methods, select the settings.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.