Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Connecting the calibration microphone
Connect the supplied calibration microphone to the unit. In advance, assemble the mic stand.
Place the mic stand at your listening position and set the calibration microphone on the mic stand.
1
Adjust the position of the mic stand so that the calibration microphone is level with your ears.
Calibration microphone (supplied)
Note
Fully insert the plug of the calibration microphone into the CALIBRATION MIC jack. If the calibration microphone is not firmly
connected, it may not be possible to measure correctly.
Install the calibration microphone horizontally so that L (left) and R (right) are at the same height.
Related Topic
Assembling the calibration mic stand
5-037-030-11(1) Copyright 2022 Sony Corporation
90
Advertisement
Table of Contents
