Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Connecting 5.1-channel speaker system with front B speaker connection
Connect each speaker to the SPEAKERS terminals on the rear of the unit.
If you are not using surround back speakers or height/overhead speakers, you can connect additional front B speakers to the
SPEAKERS SURROUND BACK/HEIGHT (FRONT B/BI-AMP/ZONE 3) terminals.
Before connecting cables, be sure to disconnect the AC power cord (mains lead).
For details on how to connect speaker cables to the unit, see
Monaural audio cable (not supplied)
Speaker cable (not supplied)
After you have made the front B speaker connection, set [Speaker Pattern] in [Manual Speaker Settings] under [Speaker
Settings] to [Front B].
You can select the front speaker system you want to use by pressing SPEAKERS on the unit.
Note
Connect speakers with a nominal impedance of 6 ohms to 16 ohms.
After you have installed and connected your speakers, be sure to select the speaker pattern you want using [Speaker Pattern] in
[Manual Speaker Settings] under [Speaker Settings].
"How to connect speaker
59
cables."
Advertisement
Table of Contents
