Cannot Connect To The Network - Sony STR-AN1000 Help Manual

Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000

Cannot connect to the network.

Check that the LAN cable is connected to the unit when you want to connect the unit to the network via a wired LAN
connection.
Check the network information. If the connection failed, set up the network connection again.
If the unit is connected through a wireless network, move the unit and the wireless LAN router/access point closer to each
other and perform the setup again.
Make sure that you use a wireless LAN router/access point.
Make sure that the wireless LAN router/access point is turned on.
Check the settings of the wireless LAN router/access point and perform the setup again. For details on the settings of
devices, refer to the operating instructions of the devices.
Wireless networks are influenced by electromagnetic radiation emitted by microwave ovens and other devices. Move
the unit away from these devices.
Related Topic
Checking the network connection status (Network Connection Status)
5-037-030-11(1) Copyright 2022 Sony Corporation
334