Sony STR-AN1000 Help Manual page 21

Multi channel av receiver/multi channel av amplifier
Hide thumbs Also See for STR-AN1000:
Table of Contents

Advertisement

Select a sound field.
360SSM
Activates or deactivates the 360 Spatial Sound Mapping function.
4.
DISPLAY
Displays information on the TV screen.
AMP MENU
Displays the menu on the display panel to operate the unit.
BACK
Returns to the previous menu or exits a menu or on-screen guide that is displayed on the TV screen.
OPTIONS
Displays the options menus. (The menu is not displayed for the TV input.)
(up)/
(down)/
Press
(up)/
(down)/
Then press
(enter) to enter the selection.
HOME
Displays the home menu on the TV screen.
5.
BLUETOOTH TX/RX
Switches the [Bluetooth Mode] to [Transmitter] or [Receiver].
In [Transmitter] mode, the unit sends audio to BLUETOOTH headphones/speakers.
In [Receiver] mode, the unit receives and outputs audio from the remote device.
(muting)
Turns off the sound temporarily. Press the button again to restore the sound.
PURE DIRECT
Activates or deactivates the Pure Direct function.
CUSTOM1
Saves and recalls various settings for the unit. Press to select the custom preset setting. Press and hold to save the
current settings to a preset.
(volume) +(*2)/–
Adjusts the volume level of all speakers at the same time.
/
(previous/next),
Skip, play, pause operation.
PRESET +/– (for US, Canadian, and Asia-Pacific models only)
Select preset stations or channels. Press and hold to scan stations automatically.
HDMI OUT
Switches the output for two TVs connected to the HDMI OUT A (TV) and HDMI OUT B/ZONE 2 jacks.
When [HDMI OUT B Mode] is set to [Main] in the [HDMI Settings] menu, output is toggled between [HDMI A], [HDMI B],
[HDMI A+B] and [HDMI OFF] each time the button is pressed. When [HDMI OUT B Mode] is set to [Zone2], output is
toggled between [HDMI A] and [HDMI OFF] each time the button is pressed.
SETTINGS
Displays the [Setup] menu on the TV screen.
TEST
Displays the [Test Tone] selection screen on the TV screen.
AUTO CAL.
Press to perform Auto Calibration.
*1
The sound fields for movie and music may not work, depending on the input or the speaker pattern you select, or with audio formats.
*2
The
(play/pause) and
Note
The above explanations are intended to serve as examples.
Depending on the model of your connected device, some functions explained in this section may not work with the supplied remote
control.
(left)/
(right),
(enter)
(left)/
(right) to select the menu items.
(play/pause) (*2)
(volume) + buttons have tactile dots. Use the tactile dots as reference when operating the unit.
5-037-030-11(1) Copyright 2022 Sony Corporation
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ta-an1000

Table of Contents