Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Reverting to the factory default settings
If the unit still does not operate properly, reset the unit.
Select [Setup] - [Resetting] from the home menu.
1
Select [All Settings].
2
Select [Start].
3
To cancel resetting
Select [Cancel] in step 3.
If you cannot perform resetting using the home menu
Press and hold
(power) on the unit for more than 10 seconds. The settings return to their initial status.
Note
It takes a few minutes for the memory to be cleared completely. Do not turn the unit off until [RESET] appears on the display panel.
By resetting, the link with the wireless subwoofer and rear speakers (not supplied) may be lost. In this case, reconnect them by
referring to their operating instructions.
5-037-030-11(1) Copyright 2022 Sony Corporation
357
Advertisement
Table of Contents
