Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Connecting 5.1-channel speaker system with bi-amplifier connection
You can enhance the sound quality of the front speakers by separately connecting the built-in amplifiers to tweeters and
woofers in a bi-amplifier configuration.
If you are not using surround back speakers or height/overhead speakers, you can connect the front speakers to the
SPEAKERS SURROUND BACK/HEIGHT (FRONT B/BI-AMP/ZONE 3) terminals using a bi-amplifier connection.
Before connecting cables, be sure to disconnect the AC power cord (mains lead).
For details on how to connect speaker cables to the unit, see
Connecting front speakers with bi-amplifier connection
Connect the jacks on the Lo (or Hi) side of the front speakers to the SPEAKERS FRONT A terminals, and connect the jacks
on the Hi (or Lo) side of the front speakers to the SPEAKERS SURROUND BACK/HEIGHT (FRONT B/BI-AMP/ZONE 3)
terminals of the unit.
Make sure that metal fittings of Hi/Lo attached to the speakers have been removed from the speakers to avoid unit
malfunction.
Speaker cable (not supplied)
Connecting speakers other than front speakers
Connect both the surround L and surround R speakers to the SPEAKERS SURROUND terminals of the unit, connect the
center speaker to the SPEAKERS CENTER terminals of the unit, and connect the subwoofer to the SUBWOOFER OUT
terminal of the unit.
"How to connect speaker
57
cables."
Advertisement
Table of Contents
