Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Calibrating the phase characteristics of the speakers (Automatic Phase Matching)
You can set the A.P.M. (Automatic Phase Matching) function in the D.C.A.C. IX (Digital Cinema Auto Calibration). This
calibrates the phase characteristics of the speakers for well-coordinated surround sound.
Select [Setup ] - [Speaker Settings] from the home menu.
1
Select [Auto Calibration Settings].
2
Select [Automatic Phase Matching].
3
Select the setting you want.
4
Auto: Switches the [Automatic Phase Matching] function on or off automatically.
Off
Note
This function does not work in the following cases:
Headphones are connected.
[Auto Calibration] has not been performed.
[Bluetooth Mode] is set to [Transmitter].
[DSD Native] is set to [On] and DSD signals are being played back.
[Pure Direct] is set to [On].
The unit may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending on the
audio format.
5-037-030-11(1) Copyright 2022 Sony Corporation
194
Advertisement
Table of Contents
