Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Updating the software automatically (Auto Update Settings)
You can set the software to update automatically. If you set [Auto Update] to [On], the auto update is performed from 2:00 AM
to 5:00 AM of the selected time zone.
Select [Setup] - [Network Settings] from the home menu.
1
Select [Auto Update Settings].
2
Select [Auto Update] and set to [On].
3
Confirm [Time Zone] is selected and then press
4
Select the area and then select the nearest city to where you live.
5
Note
To update the software at the midnight while the unit is not used, set [Auto Update] and [Network/Bluetooth Standby] to [On].
If [Auto Update] is set to [On] while [Network/Bluetooth Standby] is set to [Off], update starts automatically while the unit is turned off.
Depending on the provided update type, the update may start automatically even if [Auto Update] is set to [Off], or the update may start
automatically while the unit is turned off.
.
5-037-030-11(1) Copyright 2022 Sony Corporation
222
Advertisement
Table of Contents
