Sony STR-AN1000 Help Manual page 214

Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Assigning the surround back speaker terminals (Surround Back Speaker Assign)
You can set the assignment for the SPEAKERS SURROUND BACK/HEIGHT (FRONT B/BI-AMP/ZONE 3) terminals.
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Manual Speaker Settings].
2
Select [Surround Back Speaker Assign].
3
Select the setting you want.
4
Zone3: When using the Zone 3 connection.
BI-AMP: When using the bi-amplifier speaker connection.
Front B: When using the front B speaker connection.
Off: When none of the above connections is used.
Note
You can only set [Surround Back Speaker Assign] under the following conditions:
The speaker pattern is set to a setting without surround back and height speakers.
Headphones are not connected.
[Bluetooth Mode] is set to other than [Transmitter].
Related Topic
Connecting 5.1-channel speaker system with bi-amplifier connection
Connecting 5.1-channel speaker system with front B speaker connection
Connecting 5.1-channel speaker system with Zone 3 connection
Selecting the speaker pattern (Speaker Pattern)
Selecting the front speakers
5-037-030-11(1) Copyright 2022 Sony Corporation
214