Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Selecting the Auto Calibration type (Calibration Type)
You can select a calibration type after you have performed the Auto Calibration and saved the settings.
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Auto Calibration Settings].
2
Select [Calibration Type].
3
Select the setting you want.
4
Full Flat: Makes the measurement of frequency from each speaker flat.
Engineer: Sets to "the Sony listening room standard" frequency characteristics.
Front Reference: Adjusts the characteristics of all of the speakers to match the characteristics of the front speaker.
Off
Note
This function does not work in the following cases:
Headphones are connected.
[Auto Calibration] has not been performed.
[Bluetooth Mode] is set to [Transmitter].
[DSD Native] is set to [On] and DSD signals are being played back.
[Pure Direct] is set to [On].
The unit may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending on the
audio format.
5-037-030-11(1) Copyright 2022 Sony Corporation
195
Advertisement
Table of Contents
