Sony STR-AN1000 Help Manual page 31

Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Notes on connecting cables
Before connecting cables, be sure to disconnect the AC power cord (mains lead).
It is not necessary to connect all of the cables. Connect cables according to the availability of jacks on the connected
device.
For HDMI cables, be sure to use a Premium High Speed HDMI Cable with Ethernet, which supports bandwidths up to 18
Gbps. For video signals that require a high bandwidth such as 4K/120p, 8K, etc., be sure to use an Ultra High Speed
HDMI Cable that supports bandwidths up to 48 Gbps. For details about the high bandwidth video format, refer to
formats supported by the
We do not recommend using an HDMI-DVI conversion cable. If you connect an HDMI-DVI conversion cable to a DVI-D
device, the sound and/or image may be lost. Connect separate audio cables or digital connecting cables, then reassign
the input jacks if the sound is not output correctly.
When connecting optical digital cables, insert the plugs straight until they click into place.
Do not bend or tie optical digital cables.
Hint
All of the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz and 96 kHz sampling frequencies.
If you want to connect several digital devices, but cannot find an unused input
In this case, reassign the input jacks.
Related Topic
About HDMI connections
Using other digital audio input jacks (Input Assign)
Setting HDMI signal formats (HDMI Signal Format)
unit."
5-037-030-11(1) Copyright 2022 Sony Corporation
31
"Video