Sony STR-AN1000 Help Manual page 36

Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Speaker configuration and speaker pattern settings
This unit allows you to connect up to a 7.1-channel system. The table below shows examples of speaker configurations and
speaker pattern settings.
Speaker configuration in each zone
Main zone
5.1-channel
7.1-channel using surround back speakers
5.1.2-channel using top middle speakers
5.1.2-channel using Dolby Atmos enabled
speakers
5.1-channel with Zone 3 connection
5.1-channel with bi-amplifier connection
5.1-channel with front B speaker connection
*
You can only set [Surround Back Speaker Assign] if the speaker pattern is set to a setting that does not have surround back and height speakers.
Hint
This unit allows you to connect Sony wireless rear speakers and a Sony subwoofer.
When your Sony TV has the S-CENTER SPEAKER IN jack, you can output the center part of the unit sound from the TV speaker.
By setting [SpeakerRelocation / PhantomSurroundBack] to [Type A] or [Type B] in the [Audio Settings] menu, you can enjoy a surround
effect equivalent to up to 7.1.2 channels in terms of hearing. When you set [SpeakerRelocation / PhantomSurroundBack], perform Auto
Calibration in advance.
Related Topic
Selecting the speaker pattern (Speaker Pattern)
Assigning the surround back speaker terminals (Surround Back Speaker Assign)
Connecting 5.1-channel speaker system
Connecting 7.1-channel speaker system using surround back speakers
Connecting 5.1.2-channel speaker system using top middle speakers
Connecting 5.1.2-channel speaker system using front Dolby Atmos enabled speakers
Connecting 5.1-channel speaker system with Zone 3 connection
Connecting 5.1-channel speaker system with bi-amplifier connection
Connecting 5.1-channel speaker system with front B speaker connection
Connecting Sony wireless rear speakers/subwoofer
When your TV has the S-CENTER SPEAKER IN jack
[Surround Back Speaker
Assign]
Zone 3
Not used Not available
Not used Not available
Not used Not available
Not used Not available
2-
[Zone3]
channel
Not used [BI-AMP]
Not used [Front B]
36
[Speaker Pattern]
setting
[5.1]
[7.1]
[5.1.2 (TM)]
[5.1.2 (FD)]
[5.1]
[5.1]
[5.1]