Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Setting the crossover frequency of the speakers (Crossover Frequency)
You can set the bass crossover frequency of speakers for which [Manual Speaker Settings] - [Size] has been set to [Small] in
the [Speaker Settings] menu. A measured speaker crossover frequency is set for each speaker after the Auto Calibration is
performed.
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Manual Speaker Settings].
2
Select [Crossover Frequency].
3
Select the speaker for which you want to adjust the crossover frequency on the screen.
4
Set the crossover frequency of the selected speaker.
5
Note
This function does not work in the following cases:
Headphones are connected.
[Bluetooth Mode] is set to [Transmitter].
[Size] for none of the speakers is set to [Small].
The surround back speakers will be set to the same setting as that of the surround speakers.
5-037-030-11(1) Copyright 2022 Sony Corporation
212