Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Setting up a wired LAN connection
You can set up a wired LAN connection by the following procedure. Connect the unit and the router with a LAN cable
beforehand.
Select [Setup] - [Network Settings] from the home menu.
1
Select [Internet Settings].
2
Select [Next] when [LAN cable connection was detected. Perform Wired LAN setup.] appears.
3
Select [Auto] on the TV screen for the IP address acquisition method.
4
To set the IP address manually, select [Manual] and follow the on-screen instructions.
The network settings are displayed on the TV screen.
Press
(right).
5
Select [Save & Connect].
6
The unit starts connecting to the network.
When the unit is successfully connected to the network, [NETWORK] lights up on the display panel of the unit.
Hint
See [Network Connection Status] in the [Network Settings] menu when checking the network settings.
Related Topic
Connecting a LAN cable (for wired LAN connections only)
5-037-030-11(1) Copyright 2022 Sony Corporation
129
Advertisement
Table of Contents
