Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Enjoying content of a connected device without turning on the unit (Standby Through)
This function allows you to enjoy the sound and image of a connected device without turning on the unit.
Select [Setup] - [HDMI Settings] from the home menu.
1
Select [Standby Through].
2
Select the setting you want.
3
Auto: The unit outputs HDMI signals to the TV from the HDMI OUT A (TV) jack when the TV is turned on while the
unit is in the standby mode.
Sony recommends this setting if you are using a "BRAVIA" Sync-compatible TV manufactured by Sony. This setting
saves power in the standby mode compared to the [On] setting.
On: The unit continuously outputs HDMI signals from the HDMI OUT A (TV) jack when in standby mode. Sony
recommends this setting if you are using a TV that is not manufactured by Sony.
Off: The unit does not output HDMI signals when in standby mode. This setting saves power in the standby mode
compared to the [On] setting.
Note
When the unit is in standby mode, the
[Auto].
When [Auto] is selected, it may take a little more time for the image and sound to be output to the TV than when [On] is selected.
This function does not work for the HDMI OUT B/ZONE 2 jack.
[Auto] may work on other devices than those manufactured by Sony. However, operation is not guaranteed.
(power) indicator on the front panel lights up in amber if [Standby Through] is set to [On] or
5-037-030-11(1) Copyright 2022 Sony Corporation
229
Advertisement
Table of Contents
