Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Connecting wireless speakers manually (Start manual linking)
The unit is compatible with connection to Sony wireless rear speaker/subwoofer (not supplied).
When you connect the Sony wireless rear speaker/subwoofer to the unit for the first time, follow the steps below.
Once connected, the Sony wireless rear speaker/subwoofer will be automatically connected to the unit the next time you turn
on the power.
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Wireless Speaker Settings].
2
Select [Start manual linking].
3
Press LINK on the speaker (not supplied).
4
The power indicator of the speaker (not supplied) that had LINK pressed flashes twice repeatedly in green.
Select [Start].
5
The manual connection starts. The connecting process appears on the TV screen. To cancel the manual connection,
select [Cancel].
When [Connected] is displayed for the target speakers, select [Finish].
6
Press
(enter).
7
The manual connection is established and the power indicator of the speaker (not supplied) lights in green.
Follow the on-screen instructions to perform Auto Calibration.
8
When the connection settings of wireless speakers are complete, a screen that guides you to [Auto Calibration] is
displayed.
When you connect a wireless rear speaker, select either [Surround] or [Surround Back] on the [ - Wireless Speaker
Assign] screen in Auto Calibration to assign the speaker position.
Hint
For the wireless rear speaker/subwoofer models compatible with the unit, visit the Sony website.
If you connect 2 wireless subwoofers, use the same model.
For details on the wireless rear speaker/subwoofer, refer to the operating instructions supplied with each speaker.
5-037-030-11(1) Copyright 2022 Sony Corporation
197
Advertisement
Table of Contents
