Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Connecting 7.1-channel speaker system using surround back speakers
Connect each speaker to the SPEAKERS terminals on the rear of the unit.
Before connecting cables, be sure to disconnect the AC power cord (mains lead).
For details on how to connect speaker cables to the unit, see
Monaural audio cable (not supplied)
Speaker cable (not supplied)
Note
Connect speakers with a nominal impedance of 6 ohms to 16 ohms.
After you have installed and connected your speakers, be sure to select the speaker pattern you want using [Speaker Pattern] in
[Manual Speaker Settings] under [Speaker Settings].
Related Topic
Speaker installation example
Installing 7.1-channel speaker system using surround back speakers
Selecting the speaker pattern (Speaker Pattern)
"How to connect speaker
49
cables."
Advertisement
Table of Contents
