Sony STR-AN1000 Help Manual page 219

Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Setting up a wireless LAN connection
Please confirm the following information before starting the network settings.
The network name (SSID) (*1) of the wireless LAN router/access point
The security key (passkey) (*2) for the network
*1
SSID (Service Set Identifier) is a name that identifies a particular access point.
*2
This information should be available from a label on your wireless LAN router/access point, from the operating instructions, from the person who set up
your wireless network, or from the information provided by your Internet service provider.
Select [Setup] - [Network Settings] from the home menu.
1
Select [Internet Settings].
2
Select [Next] when [Perform Wi-Fi setup.] is displayed on the TV screen.
3
A list of network names (SSID) is displayed on the TV screen.
Select a network name (SSID).
4
The unit starts connecting to the network.
To connect to a network not listed, select [New connection registration] and follow the on-screen instructions.
Confirm the connection result displayed on the TV screen.
5
When the unit is successfully connected to the network, [NETWORK] lights up on the display panel of the unit.
If the connection to the network has failed, select [Advanced Settings], and then follow the on-screen instructions to set
the network name (SSID), wireless LAN router security method, and IP address.
Hint
See [Network Connection Status] in the [Network Settings] menu when checking the network settings.
Related Topic
Connecting the unit to the network using the wireless LAN antenna (for wireless LAN connections only)
5-037-030-11(1) Copyright 2022 Sony Corporation
219