Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Setting the HDMI audio signal output of connected devices (Audio Out)
You can set the HDMI audio signal output of playback devices connected to the unit via an HDMI connection.
Select [Setup] - [HDMI Settings] from the home menu.
1
Select [Audio Out].
2
Select the setting you want.
3
AMP: HDMI audio signals from playback devices are only output to the speakers connected to the unit. Multi-channel
sound can be played back as it is.
TV + AMP: The sound is output from the speaker of the TV and the speakers connected to the unit.
Note
This function cannot be set in the following cases:
[Control for HDMI] is set to [On].
[Audio Return Channel] is set to [eARC] or [ARC].
Audio signals are not output from the speaker of the TV when [Audio Out] is set to [AMP].
When [TV + AMP] is selected, the sound quality of the playback device depends on the sound quality of the TV, such as the number of
channels and the sampling frequency, etc. If the TV has stereo speakers, the sound output from the unit is in the same stereo as the
TV, even when playing back multi-channel source.
When you connect the unit to a video device (projector, etc.), sound may not be output from the unit. In this case, select [AMP].
When you select [TV + AMP], only sound from the HDMI IN jacks is output from the speaker of the TV.
5-037-030-11(1) Copyright 2022 Sony Corporation
231
Advertisement
Table of Contents
