Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Setting HDMI signal formats (HDMI Signal Format)
You can select the signal format so that the unit can receive high resolution 4K or 8K signals.
Select [Setup] - [HDMI Settings] from the home menu.
1
Select [HDMI Signal Format].
2
Select the HDMI input you want to apply the setting from the HDMI IN jacks.
3
Select the setting you want.
4
Standard format: Selects this setting if you do not use the enhanced format.
Enhanced format: Selects this settting when inputting 4K format signals up to 4K/60p.
Enhanced format (4K120, 8K): Selects this setting when inputting signals in high-definition formats such as
4K/120p or 8K.
Note
The HDMI jacks that can be set to [Enhanced format (4K120, 8K)] are only the GAME (for AUDIO) jack and MEDIA BOX jack.
When [Enhanced format (4K120, 8K)] is selected, use an Ultra High Speed HDMI Cable (Ethernet compatible) that supports 48 Gbps.
When [Enhanced format] is selected, we recommend using a Premium High Speed HDMI Cable with Ethernet that supports 18 Gbps.
When [Enhanced format] or [Enhanced format (4K120, 8K)] is selected, some devices (cable box or satellite box, Blu-ray Disc player,
and DVD player) may not work properly. In this case, select [Standard format].
If your TV has similar menu for high bandwidth video format, check the setting on the TV menu when you select [Enhanced format] or
[Enhanced format (4K120, 8K)] on this unit. For details on the setting of the TV menu, refer to the operating instructions of the TV.
For details about the high bandwidth video format, refer to
Related Topic
About HDMI connections
"Video formats supported by the
5-037-030-11(1) Copyright 2022 Sony Corporation
235
unit."
Advertisement
Table of Contents
