Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Connecting 5.1-channel speaker system with Zone 3 connection
Connect each speaker to the SPEAKERS terminals on the rear of the unit.
Before connecting cables, be sure to disconnect the AC power cord (mains lead).
For details on how to connect speaker cables to the unit, see
Monaural audio cable (not supplied)
Speaker cable (not supplied)
After you have made the Zone 3 connection, set [Surround Back Speaker Assign] in [Manual Speaker Settings] under
[Speaker Settings] to [Zone3].
Note
Connect speakers with a nominal impedance of 6 ohms to 16 ohms.
After you have installed and connected your speakers, be sure to select the speaker pattern you want using [Speaker Pattern] in
[Manual Speaker Settings] under [Speaker Settings].
You can only set [Surround Back Speaker Assign] if the speaker pattern is set to a setting that does not have surround back and
height/overhead speakers.
To enjoy [USB], [Home Network], [Bluetooth Audio], [Chromecast built-in], [Spotify], or [AirPlay] in Zone 3, select [SOURCE] for the
zone 3 input, then and switch the main zone input.
"How to connect speaker
55
cables."
Advertisement
Table of Contents
