Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
The home menu does not appear on the TV screen.
The home menu can be displayed only when a TV is connected to the HDMI OUT jack of the unit.
When the TV is connected to the HDMI OUT A (TV) jack, press HDMI OUT on the unit or remote control to select [HDMI A]
or [HDMI A+B].
If you want to display the home menu while the TV is connected to HDMI OUT B/ZONE 2 jack instead of HDMI OUT A
(TV) jack, press AMP MENU on the remote control, set [<HDMI>] - [HDMI OUTB MODE] to [MAIN] while confirming the
display panel, then press HDMI OUT to select [HDMI B] or [HDMI A+B].
Press HOME to display the home menu.
Check that the TV is connected correctly.
Disconnect the HDMI cable from the unit and TV and then reconnect the cable.
The home menu may take some time to appear on the TV screen depending on the TV.
The home menu will not appear when the TV's video input is connected to the MONITOR OUT jack of the unit and the
video input is selected on the TV. Connect the TV and the unit with an HDMI cable, and select the HDMI input on the TV.
5-037-030-11(1) Copyright 2022 Sony Corporation
294
Advertisement
Table of Contents
