Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Setting the unit to switch to standby mode automatically (Auto Standby)
You can set the unit to switch to standby mode automatically when you do not operate the unit or when no signals are input to
the unit.
Select [Setup] - [System Settings] from the home menu.
1
Select [Auto Standby].
2
Select [On] or [Off].
3
When you select [On], the unit switches to standby mode automatically in about 20 minutes if there is no operation.
Note
This function does not work in the following cases:
[FM TUNER] is selected as the input (for US, Canadian, and Asia-Pacific models only).
The software of the unit is being updated.
BLUETOOTH receiver (headphones/speakers) are connected.
[DSD Native] is set to [On] and DSD signals are being played back.
5-037-030-11(1) Copyright 2022 Sony Corporation
261
Advertisement
Table of Contents
