Do you have a question about the TA-DX8 and is the answer not in the manual?
Questions and answers
Suresh kumar
April 13, 2025
Surround sound not working properly
1 comments:
Mr. Anderson
April 13, 2025
To fix the surround sound issue on your Sony TA-DX8, follow these steps based on the provided context:
1. Check the Input Signal: Ensure the incoming signal is clean and properly connected. A broken or noisy signal can cause poor sound quality.
2. Inspect the Speaker Output Line: If the speaker-out line is damaged or not properly closed, it can affect surround sound. Look for any physical damage or loose connections.
3. Replace Faulty Components: The issue might be due to damaged internal components, such as the IC STK402-100S. Replacing this part has resolved similar problems.
4. Modify or Bypass the Head Unit: If the amplifier is integrated with a default head unit and not working properly, modifying the unit to work independently may help. This involves circuitry changes.
5. Check for Rough or Noisy Sound: If the sound is still rough after part replacement, further inspect related components for defects or consider checking the preamp section.
6. Power and Mode Settings: Confirm the unit can fully power on and is not stuck in standby. Also, verify it is not locked in satellite mode, which may affect surround output.
Always ensure safety when opening and working on electronic devices.
This answer is automatically generated
Antolín Labras Robles
July 23, 2025
Tendrán en existencia el conector del cabezal de modular Sony al amplificador?
TA-DX8 3 7 63 1515 0 SERVICE MANUAL E Model Australian Model TA-DX8 is the amplifier section in MHC-DX8, MHC-VX88. SPECIFICATIONS L 13942296513 INTEGRATED STEREO AMPLIFIER u163 http://www.xiaoyu163.com...
LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB- LISHED BY SONY.
http://www.xiaoyu163.com SECTION 1 GENERAL 3 7 63 1515 0 • LOCATION OF CONTROLS – Front and Top view – SATELLITE MODE switch ON/OFF switch SATELLITE LEVEL control Indicator L 13942296513 – Rear view – SYSTEM CONTROL connector SPEAKER terminal VOLTAGE SELECTOR switch (EXCEPT Mexican and Australian models) u163 http://www.xiaoyu163.com...
http://www.xiaoyu163.com SECTION 2 DISASSEMBLY 3 7 63 1515 0 Note: Follow the disassembly procedure in the numerical order given. COVER 2 two screws (BVTP3 × 10) 1 two screws (case3 TP2) 2 four screws (BVTP3 × 10) 3 cover 1 two screws (case3 TP2) L 13942296513 FRONT PANEL SECTION...
TA-DX8 3-5. SCHEMATIC DIAGRAM – PANEL/PRIMARY/SECONDARY Boards – 3 7 6 3 1 5 1 5 0 (Page 7) 1 3 9 4 2 2 9 6 5 1 3 (Page 7) w w w u 1 6 3 The components identified by mark 0 or dotted line with mark 0 are critical for safety.
http://www.xiaoyu163.com SECTION 5 SECTION 4 MAIN EXPLODED VIEW ELECTRICAL PARTS LIST 3 7 6 3 1 5 1 5 0 NOTE: NOTE: • -XX and -X mean standardized parts, so they • Items marked “*” are not stocked since they The components identified by •...
Page 14
TA-DX8 3 7 63 1515 0 L 13942296513 u163 Sony Corporation 9-929-220-11 2000D0520-1D Audio Entertainment Group Printed in Japan C 2000. 4 Published by HA Quality Assurance Dept. http://www.xiaoyu163.com...
Need help?
Do you have a question about the TA-DX8 and is the answer not in the manual?
Questions and answers
Surround sound not working properly
To fix the surround sound issue on your Sony TA-DX8, follow these steps based on the provided context:
1. Check the Input Signal: Ensure the incoming signal is clean and properly connected. A broken or noisy signal can cause poor sound quality.
2. Inspect the Speaker Output Line: If the speaker-out line is damaged or not properly closed, it can affect surround sound. Look for any physical damage or loose connections.
3. Replace Faulty Components: The issue might be due to damaged internal components, such as the IC STK402-100S. Replacing this part has resolved similar problems.
4. Modify or Bypass the Head Unit: If the amplifier is integrated with a default head unit and not working properly, modifying the unit to work independently may help. This involves circuitry changes.
5. Check for Rough or Noisy Sound: If the sound is still rough after part replacement, further inspect related components for defects or consider checking the preamp section.
6. Power and Mode Settings: Confirm the unit can fully power on and is not stuck in standby. Also, verify it is not locked in satellite mode, which may affect surround output.
Always ensure safety when opening and working on electronic devices.
This answer is automatically generated
Tendrán en existencia el conector del cabezal de modular Sony al amplificador?