Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Synchronizing audio with video output (A/V Sync)
You can delay the output of audio to minimize the time gap between audio output and a visual display.
You can set the function for each input independently.
Select [Setup] - [Audio Settings] from the home menu.
1
Select [A/V Sync].
2
Select the setting you want.
3
0 ms – 300 ms: You can adjust the delay from 0 ms to 300 ms in 10 ms intervals.
HDMI Auto: The time gap between the audio output and visual display of a TV connected via an HDMI connection
will be adjusted automatically. This function is available only when the TV supports the [A/V Sync] function.
Note
The unit may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending on the
audio format.
This function is not available in the following cases:
[Bluetooth Mode] is set to [Transmitter].
[DSD Native] is set to [On] and DSD signals are being played back.
5-037-030-11(1) Copyright 2022 Sony Corporation
244
Advertisement
Table of Contents
