Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Setting to use the unit by connecting to a Sonos device (Works with Sonos)
Select [Setup] - [Network Settings] from the home menu.
1
Select [Works with Sonos].
2
Select the Sonos device you want to connect from the list on the right side of the TV screen.
3
If there is no connected device in the list, select [Refresh].
To disconnect a connected Sonos device
Select [Remove Connected Device].
To set a connected Sonos device
After step 2, you can make the following settings for each connected device.
Input: Selects an input that works with your Sonos device.
Preset Volume: Sets the volume when selecting an input of the Sonos device.
Output Zone: Sets the zone to which the sound of the Sonos device is output.
5-037-030-11(1) Copyright 2022 Sony Corporation
225
Advertisement
Table of Contents
