Sony STR-AN1000 Help Manual page 177

Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Switching the TVs that output the HDMI video signals
If [HDMI OUT B Mode] is set to [Main], and you have connected two TVs to the HDMI OUT A (TV) and HDMI OUT B/ZONE 2
jacks, you can switch the output for these two TVs using the HDMI OUT button on the remote control.
Connect two TVs to the unit, and turn on the unit and the two TVs.
1
Press HDMI OUT.
2
Each time you press the button, the output will be switched as follows:
HDMI A - HDMI B - HDMI A+B - HDMI OFF
Note
[HDMI A+B] may not work if the compatible video formats of the TVs connected to the HDMI OUT A (TV) jack and the HDMI OUT
B/ZONE 2 jack of the unit are different.
[HDMI A+B] may not work depending on the playback device you connect.
When you connect two Dolby Vision-compatible TVs to the unit and select [HDMI A+B], Dolby Vision content is output in the HDR10 or
SDR (Standard Dynamic Range) format. To enjoy Dolby Vision content as it is, connect only one Dolby Vision-compatible TV to the
unit, or select either [HDMI A] or [HDMI B].
If [HDMI OUT B Mode] is set to [Zone2], you cannot select [HDMI B] and [HDMI A+B].
When [HDMI OUT B Mode] is set to [Zone2], the HDMI signals are output to the Zone 2 even if [HDMI OFF] is selected.
Related Topic
Selecting the method to use the HDMI OUT B jack (HDMI OUT B Mode)
5-037-030-11(1) Copyright 2022 Sony Corporation
177