Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
The Control for HDMI function does not work properly.
Check the HDMI connection between the connected devices and the unit (refer to the supplied Startup Guide).
Enable the Control for HDMI function on the TV. For details, refer to the operating instructions of the TV.
Wait for a while, and then try again. If you unplug the unit, it will take a while before the operation is completed. Wait for 60
seconds or longer, and then try again.
If you unplug the HDMI cable or change the connection of a device, enable the Control for HDMI function on the device.
Make sure your TV is connected to the HDMI OUT A (TV) jack of the unit.
Make sure the HDMI output setting is set to [HDMI A] or [HDMI A + B].
Set [Control for HDMI] to [On] in the [HDMI Settings] menu.
Make sure the connected device supports the Control for HDMI function.
Enable the Control for HDMI function on the connected device. For details, refer to the operating instructions of the
connected device.
The types and number of devices that can be controlled by the Control for HDMI function are restricted by the HDMI CEC
standard as follows:
Recording devices (Blu-ray Disc recorders, DVD recorders, etc.): up to 3 devices
Playback devices (Blu-ray Disc players, DVD players, game consoles, video and audio streaming devices, etc.): up to
3 devices
Tuner-related devices: up to 4 devices (used one by this unit)
Audio system (receiver, amplifier, headphones, etc.): up to 1 device (used by this unit)
When [HDMI OUT B Mode] is set to [Zone2], the Control for HDMI function does not work.
5-037-030-11(1) Copyright 2022 Sony Corporation
354
Advertisement
Table of Contents
