Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Sound heard from the wireless speaker (not supplied) is unstable.
Do not place metal objects other than a TV near the unit. The wireless function with the wireless speaker (not supplied)
will be affected and the sound will become unstable.
Do not put the unit in a metal rack. The wireless function with the wireless speaker (not supplied) will be affected and the
sound will become unstable.
If there is a device nearby that generates electromagnetic waves, such as a wireless LAN or a microwave oven in use, set
the wireless speaker and the unit apart from it.
If there is an obstacle between the wireless speaker and the unit, move or remove it.
Set the wireless speaker and the unit in a position as close as possible.
Select [Setup] - [Speaker Settings] - [Wireless Speaker Settings] from the home menu and set [RF Channel] to [Off], and
then set it to [On] again.
Switch the network connection of the TV or Blu-ray Disc player from wireless to wired.
Select [Setup] - [Speaker Settings] - [Wireless Speaker Settings] from the home menu and set [Wireless Playback Quality]
to [Connection].
Install the speaker system and the wireless speaker at a distance of 1.5 m (5 ft) or more from a wireless LAN router, etc.
It may be improved by changing the direction or the antenna's angle of the wireless LAN router.
5-037-030-11(1) Copyright 2022 Sony Corporation
303
Advertisement
Table of Contents
