Setting Ied Ip Address In The Project - ABB Relion 650 Series Engineering Manual

1MRK 511 245-UUS A
IEC09000644 V1 EN-US
Figure 25: Import an IED from the context menu
2. Import the *.pcmi file from the bay level in the plant structure.
3. Click
4. Modify the configuration according to the needed application.
5. Write the configuration to the IED.
4.6.1

Setting IED IP address in the project

There are two alternatives to set IP address of the IED object in PCM600. The IED object in
PCM600 must have the same IP address and subnetwork mask as the front or rear port on the
physical IED to which the PC is connected. The IP address of the physical IEDs front and rear port
can not be set from PCM600 but only from LHMI.
• Via the first window of the wizard when including a new IED in a project, see
650 series
Engineering manual
IEC09000644-1-en.vsd
OK to insert the new IED object in the plant structure.
Ordered default configurations are not locked. The user can use any of the available
default configurations for a particular product type as a base to create an own
configuration. The only requirement is that all needed hardware and software
options are available.
It is possible to give the inserted IED in the plant structure a user defined name. Be
sure to only user characters a-z, A-Z, 0-9 and _. Do not use space character in IED
names.
© Copyright 2011 ABB. All rights reserved
Section 4
Setting up a project
GUID-4C451305-E268-49D8-B237-4EDFAFF6E322 v3
Figure 26.
39