Iec 61850 Naming Conventions To Identify An Ied - ABB Relion 650 Series Engineering Manual

Section 4
Setting up a project
IEC08000365 V2 EN-US
Figure 12:
Once a plant structure is built the name of each level in the structure should be renamed by the
names/identifications used in the grid. Use the right mouse button to build the plant structure by
selecting the elements from the context menu. Rename the level after insertion, using the
possibility or the
but still not renamed.
Procedure to build a plant structure:
• Right-click the plant structure and select
• Right-click in the plant structure and select
Group or Substation .
• Click
drop them into the plant structure. Close the window if it does not close automatically.
4.5.1

IEC 61850 naming conventions to identify an IED

This section is only valid when the IEC 61850 standard is used for station bus communication.
According to the IEC 61850–6 clause 8.4, the SCL model allows two kinds of project designation in
the object properties.
• A technical key is used on engineering drawings and for signal identifications. This is
contained in the attribute name as identification of each object. If this value is used as
reference to an object, it is contained in an attribute name starting with a string denoting the
reference target object type, and ending with the string
within SCL for referencing other objects. Observe that name is a relative identification within
a hierarchy of objects.
• A user oriented textual designation is contained in attribute desc. Attributes are not allowed
to contain carriage return, line feed or tab characters. The semantics of desc shall also be
relative within an object hierarchy.
28
PCM600: Set up a plant structure
Object Properties .
The plant structure corresponds to the complete grid including the needed IEDs.
View in the menu bar and select Object Types . Select the needed elements and drag and
© Copyright 2011 ABB. All rights reserved
IEC08000365-2-en.vsd
Figure 12 shows the start of a project with two IEDs placed
New and Create from Template ... , or
New , General and select one of the elements IED
1MRK 511 245-UUS A
Name . The technical key is used
Engineering manual
Rename
SEMOD58409-38 v4
650 series