Configuring Dnp3 Class - ABB Relion 650 Series Engineering Manual

Section 9
DNP3 communication engineering
IEC08000336 V1 EN-US
Figure 78: CMT: Context menu in DNP3 window
2. The selection window shows the number of signals selected, see
IEC08000363 V1 EN-US
Figure 79: CMT: Set Index menu
3. Define the
Procedure to set class configuration:
1. Click in the class field of the signal to change the class configuration.
2. The
3. Make the selection according to the definitions in the project and click
window and get the new configuration, see
IEC08000338 V1 EN-US
Figure 80: CMT: Select Class window
9.3.1

Configuring DNP3 class

In DNP3 the user classifies the signals and defines those signals that are not member of any class.
CMT has a default predefined organization of classes per signal type. In the master station the
96
Starting index for this group and click OK .
Select Class window opens.
IEC08000338.vsd
© Copyright 2011 ABB. All rights reserved
IEC08000336.vsd
Figure 80.
1MRK 511 245-UUS A
Figure 79.
IEC08000363.vsd
OK to close the
GUID-B46924F8-B960-4B79-8EB8-4DFADABDFB10 v1
650 series
Engineering manual