ABB Relion 650 Series Engineering Manual page 100

Section 9
DNP3 communication engineering
IEC10000172 V1 EN-US
Figure 73: Configuring hardware channels directly to the function blocks
IEC10000173 V1 EN-US
Figure 74: CMT: Hardware channels appearing in the Communication Management Tool
2. Right-click the IED in the plant structure and select
Communication management tool.
3. Select the DNP3 protocol from the new window and click
the two container windows, which open after the selection of DNP3.
•
•
IEC08000337 V1 EN-US
Figure 75: CMT: Container window design when selecting DNP3 protocol
Procedure to move signals:
94
The right window shows tabs for possible communication channels.
The left window has a drop down menu for signal selection and buttons for signal
movement, see Figure 75.
© Copyright 2011 ABB. All rights reserved
IEC10000172.vsd
IEC10000173.vsd
Communication Management to start the
OK .
Figure 75 presents the design of
IEC08000337.vsd
1MRK 511 245-UUS A
650 series
Engineering manual