Inserting An Ied - ABB Relion 650 Series Engineering Manual

Section 4
Setting up a project
IEC08000374 V1 EN-US
Figure 13:
4.6

Inserting an IED

The context menu or the
on the bay level in the plant structure, according to the installed connectivity package.
On the bay level in the plant structure it is possible to:
• Insert an IED in
•
•
30
PCM600: IEC 61850 signal designation concept
Object Types view shows the available 650 series IEDs possible to insert,
Offline mode or in Online mode :
Online mode: When the IED is already connected to PCM600 and the communication is
established, PCM600 can read the configuration directly from the physical IED. This is
useful when an order specific IED is used. The order configuration is written to the IED
at the factory and can be accessed by PCM600. The housing type, the used overlay
version for local HMI and the IO boards included in the IED will be read from the IED
directly.
Offline mode: When the physical IED is not available or not connected to PCM600 the
engineering steps are done without any synchronization with the IED. The offline
configuration in PCM600 can be synchronized with the physical IED at a later state by
connecting the IED to PCM600.
© Copyright 2011 ABB. All rights reserved
IEC08000374.vsd
1MRK 511 245-UUS A
SEMOD58416-5 v4
650 series
Engineering manual