ABB Relion 650 Series Engineering Manual page 43

1MRK 511 245-UUS A
template library to create a new IED in the plant structure. Change the IP address, the name and
the technical key that corresponds to the physical IED after a template IED has been imported.
Procedure to insert a template IED
1. Right-click the
2. Select
window, see
IEC08000366 V1 EN-US
Figure 23: PCM600: Selecting IED from template library
3. Select the IED from the list of available IEDs.
4. Click the icon in the right column of the list of available templates to open the
Properties . Verify the template information, see
650 series
Engineering manual
A template IED can only be inserted when the bay is selected in the plant structure.
Bay in the plant structure.
New and Create from Template ... to open the Create New Object from Template
Figure 23.
© Copyright 2011 ABB. All rights reserved
IEC08000366.vsd
Close to close the window.
Figure 24 and click
Section 4
Setting up a project
Template
37