1MRK 511 245-UUS A
Section 8
8.1
Engineering in PCM600
The Application Configuration tool (ACT) and the Parameter Setting tool (PST) in PCM600 are used
to configure the communication for IEC 60870-5-103 protocol.
1.
Add the desired IEC 60870-5-103 function blocks to the application configuration in the
Application Configuration tool.
2.
Connect the outputs of desired protection and monitoring function in the application
configuration to the inputs of the corresponding IEC 60870-5-103 function block.
3.
Set the function type and desired information number, where an information number must
be supplied, for each IEC 60870-5-103 function block instance in the Parameter Setting tool.
See the Communication protocol manual for IEC 60870-5-103 for more information about the IEC
60870-5-103 implementation in 650 series.
650 series
Engineering manual
IEC 60870-5-103 communication
engineering
© Copyright 2011 ABB. All rights reserved
IEC 60870-5-103 communication engineering
GUID-284EB0BA-BC79-4B90-8B78-878BA225479E v1
Section 8
91