ABB Relion 650 Series Engineering Manual page 90

Section 7
IEC 61850 communication engineering
3.1.
3.2.
3.3.
3.4. Link the IED clients to the Report Control Blocks.
4. Do horizontal communication engineering.
4.1.
84
Check the default data sets, see
IEC09000630 V1 EN-US
Figure 68: CCT600 data sets default content
Configure and/or re-configure the default data sets.
Note that reporting data sets shall only contain data intended to be used
by clients, for example for event handling.
The data set for GOOSE may contain signals on data attribute level or on
FCDA level. The latter is also called
Configure additional Report Control Blocks when needed for each data set used for
vertical communication.
Up to 8 report clients can be configured.
Configure GOOSE control blocks for each data set configured for GOOSE messages.
© Copyright 2011 ABB. All rights reserved
Figure 68.
IEC09000630-1-en.vsd
structured GOOSE .
1MRK 511 245-UUS A
650 series
Engineering manual