ABB Relion 650 Series Engineering Manual page 44

Section 4
Setting up a project
IEC08000367 V1 EN-US
Figure 24: PCM600: IED Template Properties
5. Click
from the selection window or click
Inserting a configured IED in 650 series
Configured IEDs in 650 series in PCM600 are available as *.pcmi files and include all information
that is related to the IED object in PCM600. The configured IEDs in 650 series is bound to a
specific hardware configuration. Configured IEDs in 650 series are available on the Connpack DVD
as .pcmi files under the file named User documentation.
Two alternatives to insert configured IEDs in 650 series:
• Use the configured IEDs in 650 series that has been ordered together with the IED.
• Create an own configuration, export the configuration as *.pcmi file and use it to configure
other IEDs.
Procedure to insert a configured IED in 650 series
1. Right-click the bay and select
25.
38
Delete Template to delete the template, click Import Template to import a template
It is possible to insert more than one IED from the
Template window and the selection window remains open until the user clicks
Close .
© Copyright 2011 ABB. All rights reserved
IEC08000367.vsd
Create to insert the selected IED to the bay, see
Import ... to select the IED configuration file (*.pcmi) , see
1MRK 511 245-UUS A
Figure
Create New Object from
Figure
650 series
Engineering manual
23.