ABB Relion 650 Series Engineering Manual page 23

1MRK 511 245-UUS A
•
•
•
•
• Disturbance record management
•
•
•
•
• Service management
•
•
•
IED Engineering Management
Project
Communication Management
Operator Disturbance Record Management
Service Management
IEC08000100 V1 EN-US
Figure 3:
Additional functionality to manage the project and to organize the user rights:
• PCM600 user management
650 series
Engineering manual
IEC 61850 station communication engineering is done with a separate tool, for example,
CCT600. PCM600 interacts with CCT600 by importing and exporting SCL files.
Organizing GOOSE messages received and managing the used IO signal is done by using
the Signal Matrix tool.
Communication engineering for the DNP3 protocol by using the Communication
Management tool.
Communication engineering for the IEC 60870-5-103 protocol by using Application
Configuration tool and Parameter Setting tool.
Generating overviews about the available (disturbance) recordings in all connected
protection IEDs by using the Disturbance Handling tool.
Manually reading the recording files (in Comtrade format) from the protection IEDs by
using the Disturbance Handling tool or automatically by using the PCM600 scheduler.
Managing recording files with the assistance of the Disturbance Handling tool.
Creating overview reports of recording file content for fast evaluation with assistance of
the Disturbance Handling tool.
Monitoring selected signals of an IED for commissioning or service purposes by using
the Signal Monitoring tool.
Listing all actual existing IED internal events by using the Event Viewer tool.
Listing all actual pending process events as they are stored in the IED internal
disturbance report event list by using the Event Viewer tool.
HWT
ACT
SMT
CMT SMT
DRH
MON EVT
PCM600
Organization of PCM600 in different management tasks
© Copyright 2011 ABB. All rights reserved
PST
GDE
IEC08000100.vsd
Section 2
Engineering tool set
17