ABB Relion 650 Series Engineering Manual page 81

1MRK 511 245-UUS A
• Switch controller (of type CSWI) for an apparatus.
• All configured function blocks with measurements (of type MMXU) for the measurements.
• VSGGIO for one bit indications for the dynamic text symbols.
• SLGGGIO for 32 bit indications for the dynamic text symbols.
Procedure
1. Right-click the apparatus symbol and select
control application function blocks opens, see
2. Select the switch control application function block that corresponds to the selected
apparatus.
3. Right-click the measurement symbol and select
measurement application function blocks opens.
4. Select the measurement application function block that corresponds to the selected symbol.
IEC08000125 V1 EN-US
Figure 57: GDE: Input signal selection
The number of order in the selection window of the process objects corresponds to the number
given in the PST tree and to the application function block in ACT.
Only those apparatus and measurements are shown that are configured in the application
configuration program.
650 series
Engineering manual
IEC08000125.vsd
© Copyright 2011 ABB. All rights reserved
Select Input Signal . A list of engineered switch
Figure 57.
Select Input Signal . A list of the engineered
Section 6
Local HMI engineering
75