Building A Plant Structure - ABB Relion 650 Series Engineering Manual

1MRK 511 245-UUS A
IEC05000609 V1 EN-US
Figure 11:
5. Name the project and include a description (optional) and click
6. PCM600 sets up a new project that will be listed under
4.5

Building a plant structure

The plant structure is used to identify each IED in its location within the substation organization. It
is a geographical image of the substation and the bays within the substation. The organization
structure for the IEDs may differ from the structure of the primary equipment in the substation. In
PCM600 it is possible to set up a hierarchical structure of five levels for the IED identification.
Build up the plant structure according to the project requirements. PCM600 offers several levels to
build the hierarchical order from Center down to the IEDs in a bay.
The following levels are available:
1. Project = Center
2. Substation = Name of the substation
3. Voltage Level = identifies to which grid type or part in the substation the IED belongs to
4. Bay = Bay within the voltage level
5. IED = selection of the IED, which is used in the bay. Several IEDs are possible within a bay, for
example one control IED and two protection IEDs.
650 series
Engineering manual
PCM600: Create a new project window
© Copyright 2011 ABB. All rights reserved
en05000609.vsd
Create .
Projects on my computer .
Section 4
Setting up a project
SEMOD58409-5 v4
27