Connecting To A Conference; Direct Dial-In - Polycom RMX 2000 Getting Started Manual

Connecting to a Conference

Direct Dial-in

Direct dial-in connection to conferences and Meeting Rooms is available
to IP endpoints only.
Participants must be provided with a dialing string which can vary
according to the network type, conference password and chairperson
password.
Participants dial the conference dial-in string and are connected to the
conference IVR Service. Once the correct information, such as the
conference password and chairperson password are entered, the
participants are connected to the conference.
IP Endpoint
SIP Endpoint
IP Endpoint
Dial-in Connection via IVR System
The chairperson can use the chairperson password as the conference
password and does not need to enter the conference password.
Participants connecting to HD Video Switching conferences must have HD
capable endpoints and must connect using the same line rate as defined for the
conference. If not, they are connected as Secondary (audio only participants).
Polycom RMX 2000 Getting Started Guide
MCU
"Conference
Password?"
Network
Conference
IVR Service
Maple Room
Conference ID: 1001
Password 34567
Oak Room
Conference ID: 1002
Password 71356
3-21