Polycom RMX 2000 Getting Started Manual page 42

Chapter 2-First Time Installation and Configuration
2-26
— State – the System Alert level of the span (Major, Minor). If there
are no span related alerts, this column contains no entries.
31 Click the check boxes in the Attached field to attach spans (E1 or T1
PRI lines) to the network service named in the Network Service Name
field.
The Spans Table displays the configuration of all spans and all ISDN
network services in the system.
When using the Fast Configuration Wizard during First Entry
Configuration, you are defining the first ISDN/PSTN Network Service in
the system. Spans can only be attached to this service.
Additional ISDN/PSTN Network Services can be defined by using the
ISDN/PSTN Network Services > New PSTN Service button in the
RMX Web Client.
Spans can be attached to, or moved between ISDN network services
by using the ISDN/PSTN Network Services > ISDN Properties >
Spans tab in the RMX Web Client.
Each ISDN RTM card can support 7 E1 or 9 T1 PRI lines.
32 Click Next.
The Video/Voice Ports Configuration dialog box is displayed.
Attached
Spans
Spans
Table