Polycom RMX 2000 Getting Started Manual page 26

Chapter 2-First Time Installation and Configuration
2-10
During normal power-ups, with a defined Management Network
Service, the red ERR LED remains OFF if there are no System Errors.
A normal power -up is complete when the green RDY LED of the
CNTL module (on the RMX's front panel) turns ON.
3 Remove the USB key.
4
Start the RMX Web Client application on the workstation.
a
In browser's address line, enter the IP address of the Control Unit
in the format:
defined in the USB key.
b
Press Enter.
The RMX Web Client Login screen is displayed.
5 In the RMX Web Client Login screen, enter the default Username
(POLYCOM)and Password(POLYCOM)and click Login.
The RMX Web Client opens and the Product Activation dialog box
appears with the serial number filled in:
6
In the Activation Key field, enter or paste the Product Activation Key
obtained earlier and click OK.
If you do not have an Activation Key, click Polycom Resource Center
to access the Service & Support page of the Polycom website.
For more information, see "Obtaining the Activation Key" on page 2-7.
http://<Control Unit IP Address>,
as