First Entry Configuration; Procedure 1: Product Registration; Obtaining The Activation Key - Polycom RMX 2000 Getting Started Manual

First Entry Configuration

Hardware
Installation
and
Setup
Gather Network
Equipment
and
Address Info
First Entry
Configuration

Procedure 1: Product Registration

There are four procedures necessary for setup of the new RMX. It is
important that they are performed in the following sequence:
1 Product Registration.
2
Modifying the Factory Default Management Network Settings.
3
First-time Power-up and Connection to MCU.
4
Modifying the Default IP and ISDN/PSTN Service Settings (Fast
Configuration Wizard).
Before the RMX can be used, it is necessary to register the product and
obtain an Activation Key.
During first-time power-up, the Product Activation dialog box is displayed,
requesting you to enter an Activation Key.

Obtaining the Activation Key

1
Access the Service & Support page of the Polycom website at:
http://portal.polycom.com
2
Login with your Email Address and Password or register as a new user.
3
Select Product Registration.
4
Follow the on-screen instructions for Product Registration and Product
Activation. (The RMX's serial number is on a sticker on the back of the
unit, if needed.)
5 When the Product Activation Key is displayed, write it down or copy it
for later pasting into the Activation Key field of the Product Activation
dialog box.
Polycom RMX 2000 Getting Started Guide
2-7