General Tab - Polycom RMX 2000 Getting Started Manual

The system displays the conference's default Name, Duration and the
default Profile, which contains the conference parameters and media
settings.
The RMX automatically allocates the conference ID, when the
conference starts.
In most cases, the default conference ID can be used and you can just
click OK to launch the conference. If required, you can enter a
conference ID before clicking OK to launch the conference.
If you are the meeting chairperson or organizer using the RMX Web
Client to start your own meeting, you need to communicate the
default conference ID (or the one you created) to the other conference
participants so they can dial in.
You can use the New Conference - General dialog box to modify the
conference parameters. If no defined participants are to be added to
the conference, or you do not want to add additional information,
click OK.

General Tab

2
Define the following parameters:
Table 3-2 New Conference – General Options
Field
Display Name
Polycom RMX 2000 Getting Started Guide
Description
The Display Name is the conferencing entity name
in native language character sets to be displayed in
the RMX Web Client.
In conferences, Meeting Rooms, Entry Queues and
SIP factories the system automatically generates an
ASCII name for the Display Name field that can be
modified using Unicode encoding.
•
English text uses ASCII encoding and can
contain the most characters (length varies
according to the field).
•
European and Latin text length is approximately
half the length of the maximum.
•
Asian text length is approximately one third of
the length of the maximum.
3-13