Polycom RMX 2000 Getting Started Manual page 65

Table 3-2 New Conference – General Options (Continued)
Field
Duration
ID
Conference
Password
Chairperson
Password
3
If all participants are undefined, dial-in and no additional
information is required for the new conference, click OK.
4 To add participants from the Participants Address Book or to define
participants (mainly dial-out participants) click the Participants tab.
Polycom RMX 2000 Getting Started Guide
Description
Define the duration of the conference in hours using
the format HH:MM (default 01:00).
Enter the unique-per-MCU conference ID. If left
blank, the MCU automatically assigns a number
once the conference is launched.
This ID must be communicated to conference
participants to enable them to dial in to the
conference.
Enter a password to be used
by participants to access the
conference. If left blank, no
password is assigned to the
conference.
This password is valid only in
conferences that are
configured to prompt for a
conference password.
Enter a password to be used
by the RMX to identify the
Chairperson and grant him/her
additional privileges. If left
blank, no chairperson pass-
word is assigned to the confer-
ence.
This password is valid only in
conferences that are
configured to prompt for a
chairperson password.
These fields are
numeric and have
a default length of
4 characters. The
administrator can
modify them in the
Setup - System
Configuration
settings. For more
information, see
RMX
Administrator's
Guide, "System
Configuration" on
page 12-5.
3-15